|
|
| The design of these units allows for the lower water temperature from solar heating compared with the hotter temperatures from traditional boilers. These heat exchangers are all supplied with mounting brackets as standard. |
|
|
|
|
|
Thermostat pocket end covers
|
Swimming Pool Heat Exchangers for use with solar panels
These heat exchangers can be supplied with a thermostat pocket in the inlet end cover (suitable for use with a 7 mm probe). This removes the need for the thermostat to be fitted into the pipework.
Swimming Pool Heat Exchangers
There are two ranges of Bowman swimming pool heat exchangers, one for use with boilers and the other for use with solar panels.
Swimming pool heat exchangers provide a simple method of heating swimming pool water indirectly from a boiler or solar panels.
All Bowman swimming pool heat exchangers are manufactured with corrosion resistant cupro-nickel tubes and bronze end covers and are therefore suitable for use with chlorine water, seawater and spa pools. Bowman heat exchangers will normally well outlast stainless steel units. Units suitable for use with pools with heating up to 145 kW or 500,000 BTU/h are supplied with mounting brackets as standard.
Bowman units are very easy to maintain, as both the end covers and tube stack can be removed for cleaning, this is unique to our design. Bowman swimming pool heat exchangers can also be used to cool swimming pool water in hot climates.
 
|
