|
|
Pump Station FlowCon A with Deltasol ax or Deltasol BS
Standard single-line solar pump station for mounting into a solar return flow.
The pump station is either available with the controller RESOL DeltaSolŪ AX or DeltaSolŪ BS.
The most important hydraulic components for operation of a solar system are already mounted for an easy and quick installation.
Integrated controller: DeltaSolŪ AX or DeltaSolŪ BS Sries Controller
- solar thermal pump WILO Star ST20/ 6 or ST20/7 (surcharge)
- manual vent
- flowmeter
- security bracket with security valve and manometer
- wall mounting with screws and dowels
- filling and flushing connections
- heat insulation
- pre-assembled
|
Circulation pump: |
|
WILO Star ST20/6 or ST20/7 (surcharge) |
|
Size: |
|
ca. 200 x 550 x 180 mm (incl. insulation) |
|
Nominal size: |
|
DN 15 |
|
Connections: |
|
ū" IT |
|
Material: |
|
Fittings: brass
Sealings: Viton / Teflon
Insulation EPP
Flat sealings: Klingerit, max. 200 °C
O-rings: Viton/EPDM, max. 180 °C |
|
Solar-non return valve: |
|
PPS, max. 180 °C |
|
Adm. maximum temperature: |
|
+ 120 °C, for a short term until +180 °C |
|
Operation pressure: |
|
maximum 8 bar |
|
Spring pressure of non-return valve: |
|
200 mm WWS |
|
Flowmeter: |
|
0,5 ... 5 l/min or 8 ... 30 l/min |
|
