| RESOL® MOTORISED VALVES 2-port valve VA20 |
 |
The valve RESOL VA20 is closed by default when currentless. The initial state can easily be inverted. The valve is operated by an
electro-thermal actuator (with manual overide) This prevents blow-back within the tube system throughout flow rate regulation.
|
| Price (ex VAT) |
|
|  |
RESOL®Motor Driven BALL Valve 2-port valve VA22
|
 |
The 2-port motor-driven ball valve RESOL VA22 is produced according to international standards and offers universal application possibilities in heating, warm water, solar and irrigation systems. A large number of application possibilities in the field of energy distribution is provided to the user. |
| Price (ex VAT) |
|
| |
| RESOL® MOTOR DRIVEN valve 3-port valve VA32 |
 |
The 3-port motor-driven valve VA32 is used in solar and heating systems, in which smaller parts of systems can be separately controlled or single equipment can be switched on or off. |
| Price (ex VAT) |
|
| |
| RESOL® CHANGEOVER VALVE 3-port valve VA300 |
 |
The 3-port valve RESOL VA300 is used for distribution of flow rates of bivalent heat sources or heating storages, e.g. in the solar and heat pump technology (temperature of the media: up to 120 °C, only for a short time up to 140 °C). The valve RESOL VA300 is equipped with one input and two outputs. |
| Price (ex VAT) |
|
| |
| CALORIMETER RESOL® WMZ -M1 FULL KIT (inc flowmeter) |
 |
Universal calorimeter module for solar and heating systems. Graphic display for indication of flow and return temperature, heat quantity, output, flow rate and sensor faults (balance values are also stored in the case of a power failure). Suited for solar systems with propylene-glycol-mixtures of 0 ... 70 Vol %. |
| Price (ex VAT) |
|
| |
|
| THERMOSATATIC MIXING VALVE/BLENDING VALVES |
 |
The MA1 is a thermostatic mixing valve is adjustable between 30–70°C. It is is especially suitable for solar systems as it will accept incoming water at up to 100°C. This valve requires 0.5 bar inlet pressure to operate. (3/4" Male unions are included)
The INTA thermostatic mixing valve is adjustable between 30–65°C. It will accept water up to 110° C. The INTA has a working pressure up to 14 bar and requires a minimum inlet pressure of 0.2 bar to operate.
(22mm compression unions are included) |
| Price (ex VAT) |
|
|
| CALEFFI SOL PRESSURE RELIEF VALVES |
 |
A pressure relief valve (PRV) is a safety device which is designed to divert pressure in the event that a pressurized system of some kind encounters a problem which leads to a dangerous rise in pressure. |
| Price |
|
Please call SALE | |
|
EXTRAS / FITTINGS (ex VAT) |
| |
